Main Fears of ATTINY261A-SU Componen

The ATTINY261A-SU is an electronic component that introduced by AMTEL Inc. and now this type of series has been available on Hqew.net. 

Let’s get close to this ATTINY261 series today, below are their main features:

Features:

• High Performance, Low Power AVR 8-Bit Microcontroller

• Advanced RISC Architecture

– 123 Powerful Instructions – Most Single Clock Cycle Execution

– 32 x 8 General Purpose Working Registers

– Fully Static Operation

– Up to 20 MIPS Throughput at 20 MHz

• High Endurance Non-volatile Memory Segments

– 2/4/8K Bytes of In-System Self-Programmable Flash Program Memory

• Endurance: 10,000 Write/Erase Cycles

– 128/256/512 Bytes of In-System Programmable EEPROM

• Endurance: 100,000 Write/Erase Cycles

– 128/256/512 Bytes of Internal SRAM

– Data retention: 20 Years at 85°C / 100 Years at 25°C

– In-System Programmable via SPI Port

– Programming Lock for Software Security

• Peripheral Features

– One 8/16-bit Timer/Counter with Prescaler

– One 8/10-bit High Speed Timer/Counter with Prescaler

• 3 High Frequency PWM Outputs with Separate Output Compare Registers

• Programmable Dead Time Generator

– 10-bit ADC

• 11 Single-Ended Channels

• 16 Differential ADC Channel Pairs

• 15 Differential ADC Channel Pairs with Programmable Gain (1x, 8x, 20x, 32x)

– On-chip Analog Comparator

– Programmable Watchdog Timer with Separate On-chip Oscillator

– Universal Serial Interface with Start Condition Detector

– Interrupt and Wake-up on Pin Change

• Special Microcontroller Features

– debugWIRE On-chip Debug System

– Power-on Reset and Programmable Brown-out Detection

– Internal Calibrated Oscillator

– External and Internal Interrupt Sources

– Four Sleep Modes: Low Power Idle, ADC Noise Reduction, Standby and Power- Down

– On-Chip Temperature Sensor

• I/O and Packages

– 16 Programmable I/O Lines

– 20-pin PDIP, 20-pin SOIC, 20-pin TSSOP and 32-pad MLF

• Operating Voltage

– 1.8 – 5.5V

• Speed Grades

– 0 – 4 MHz @ 1.8 – 5.5V

– 0 – 10 MHz @ 2.7 – 5.5V

– 0 – 20 MHz @ 4.5 – 5.5V

• Power Consumption at 1MHz, 1.8V, 25°C

– Active: 200 µA

– Power-Down Mode: 0.1 µA

For more information please visit www.hqew.net directly.