At present, electronic components are playing more and more important rols in defense or aerospace fields. Even no mechanical products can work without the semiconductor parts in this fast developing century.
RunCore Inc. has introduced the first generation of PMC solid-state memory card (RCH-I-PU3 series Solid State Storage Card, the product of Hurricane Series.
Compared with the mechanical parts, the RCH-I-PU3 series Solid State Storage Card has no any mechanical moving parts. With its superior performance, high reliability and low power consumption, these products are flexibly suitable for a variety of application environments, and has a great application prospects in aerospace, military and defense fields.
In compliance with the IEEE1386.1standard design, using the Air-cooling standard design, support two types of flash storage media – SLC and MLC, capacity range of the first generation PMC are up to 32GB-128GB(SLC）and 32GB-512GB(MLC) respectively.
RCH-I-PU3 Series PMC solid-state memory card is using the industrial level of SATA SSD controller, which provides a reliable ECC standard. Using flash as the storage medium, it has a quite working performance. The storage is using a “Loss balance algorithm” and “bad block management techniques” to ensure that the users can access accurately and consistently.
According to the released report, the flash’s life is generally restricted by the number of times of accessing. In order to extend the life of the hard disk, one key self-destruction has integrated the benefits of “balance of loss of special algorithm” and “bad block management algorithm”, which ensure that the hard disk read and write cycles will cover all of the flash memory area. This algorithm can eliminate the repeated operation in one single memory area, which prevents the flash memory blocks in advance by “wear and tear”. It seems this product can cut a lot of government budget with such a long electronic component replaced circle.
RCH-I-PU3 Series PMC solid-state memory card support software RAID feature PCI-SATA bridge chip, and two SATA solid-state memory cell constituted is compatible with 32bit 33/66MHz PCI Transfer Protocol. It provides two equal sets of SATA SSD storage spaces, each set of space’s write and read speed is up to 70MB/S. Using different operating system like Window, Linux and Vxworks, it then enable to do RAID0 (Stripe) and RAID1 (Mirror) mode of data transmission, which also provides the features such as superior performance and data security. Under the RAID0 (stripe) mode of data transition, its speed is up to 120MB/S.
It is said that without power supplied, data in Runcore’s solid state disk storage can still maintain up to 10 years validity. Under any certain circumstances, stored data can extend the retention period and there would not be any sudden loss.
It seems this product can cut a lot of government budget with such a long electronic component replaced circle.
Article source: http://www.hqew.net/article/showdetails-article-220.html
| Hot Products： | ||||
没有评论:
发表评论